Creating A New Campus; Creating A New Building In A Campus - Dell PowerConnect W-AirWave 7.6 User Manual

"Auto-Matching Planned Devices" on page 305
l
"Printing a Bill of Materials Report" on page 305
l

Creating a New Campus

Floors are associated with a building, and buildings are associated with a campus. In order to create a new floor, you
must first create a campus with at least one building.
To create and place your campus, follow these steps:
1. Navigate to VisualRF > Floor Plans.
2. Select the Add Campus button located above the floor plan on the top left. The Create New Campus window,
illustrated in
3. Enter the following campus information:
Name of the campus
l
Client Transmit Power - used in auto placement of access points onto floors within this campus. The range
l
is 30mW to 100mW.
Desired Speed (mbps)- used in auto placement of access points onto floors within this campus. The range is
l
6 to 200 mbps.
NOTE: Buildings and floors inherit transmit power and speed from the campus.
Figure 230:
Create New Campus window
4. Select OK to save. You will see a new Campus icon appear on the campus canvas.
5. Add appropriate network geographical background or upload a personalized image by right-clicking on the
background.
Set Map - Allows you to browse with the included maps.
l
Auto Arrange Campuses -Arranges the campus in alphabetical order across the background.
l
6. Drag the new Campus icon to the appropriate location on the map background.

Creating a New Building in a Campus

1. Select the newly created Campus icon from the previous step. When the blank campus area opens, select the Add
New Building icon.
2. When the New Building window appears, enter the following information:
Dell PowerConnect W-AirWave 7.6 | User Guide
Figure 230, appears.
Using VisualRF | 295