Dell PowerConnect W-AirWave 7.6 User Manual page 308

Table 146:
New Building Fields and Descriptions
Field
Name
Campus
Longitude & Latitude
Distance between
floors
Attenuation between
floors
Client Transmit
Power
Desired Speed
Address
Figure 231:
Create New Building Window
3. Select OK to save. A new Building icon will appear in the upper-left corner of the canvas.
4. Drag the Building icon to the appropriate location on the map background.
296 | Using VisualRF
Description
Name of the building; located on an existing campus.
Lists all campuses configured on your
These fields are used to represent a building on Google Earth.
The normal distance between floors in the building. This value can be overridden as each floor is
created, but this is the default value for every new floor added to the system. This data element can
be imported or exported to external planning tools like Ekahau. It is not currently utilized by
AirWave.
Enter the attenuation loss in decibels between floors. This value can be overridden as each floor is
created, but this is the default value for every new floor added to the system. This data element can
be imported or exported to external planning tools like Ekahau. It is not currently utilized by
AirWave.
This value is used when auto-provisioning access points onto a floor plan.
Speed will determine the new access points when auto-provisioning.
Building or Campus address (optional)
AirWave.
Dell PowerConnect W-AirWave 7.6 | User Guide