Understanding The Aps/Devices > Interfaces Page - Dell PowerConnect W-AirWave 7.6 User Manual

Figure 91:
APs/Devices > Interfaces Page for Wired Devices (partial view)
.
The Interfaces page includes a summary of all the interfaces at the top. In case of the stacked switches, the master
includes the interfaces of all the members including its own. The physical and the virtual interfaces are displayed in
separate tables, labeled Physical Interfaces and Virtual Interfaces. VLANs are listed below the interface.
NOTE: The Interfaces page for AirMesh APs includes VLANs as part of the Virtual Interfaces. When no management interface is
specified, VLAN1 will be treated as management interface. If VLAN1 does not exist, then ethernet 0 will be treated as the
management interface
AirWave monitors Up/Down status and bandwidth information on all interfaces. You can edit multiple interfaces
concurrently by selecting one of the two Edit Interfaces hyperlinks. Interface labels are used to group one or more
interfaces for the purpose of defining interface bandwidth triggers.
Understanding the APs/Devices > Interfaces Page
"Monitoring Data for Wired Devices (Routers and Switches)" on page 126
interface information for all physical and virtual interfaces on an entire router or switch. Select any interface hotlink
in the Interface column of the Physical or Virtual Interfaces tables on the stacked switches to go to an Interface
Monitoring page displaying data relevant to that specific interface, as shown
128 | Discovering, Adding, and Managing Devices
showed you how to view high- level
Figure 92.
Dell PowerConnect W-AirWave 7.6 | User Guide