Delivering Triggered Alerts; Viewing Alerts - Dell PowerConnect W-AirWave 7.6 User Manual

Hide thumbs Also See for PowerConnect W-AirWave 7.6:
Table of Contents

Advertisement

Table 112:
Disk Usage Trigger and Condition Settings
AMP Health
Trigger
Disk Usage
b. Repeat this procedure for as many triggers and conditions as desired. Refer to the start of
Triggers" on page 191

Delivering Triggered Alerts

AirWave uses Postfix to deliver alerts and reports via email because it provides a high level of security and queues
email locally until delivery. If AirWave is located behind a firewall, preventing it from sending email directly to a
specified recipient, use the following procedures to forward email to a smarthost.
1. Add the following line to /etc/postfix/main.cf:
relayhost = [mail.example.com]
where mail.example.com is the IP address or hostname of your smarthost
2. Run
service postfix restart
3. Send a test message to an email address:
Mail -v user@example.com
Subject: test mail
.
CC:
4. Press Enter.
5. Check the mail log to ensure mail was sent:
tail -f /var/log/maillog

Viewing Alerts

Apart from visiting System > Alerts, AirWave displays alerts and provides alert details in two additional ways:
1. The Alert Summary table is available on the following AirWave pages, and is illustrated in
APs/Devices > List
l
Groups > Monitor
l
Home > Overview
l
Clients > Connected or Client Detail
l
Figure 132:
Alert Summary Table Illustration
This table displays alerts as follows; select the alert Type to display alert details:
AirWave Alerts—Displays details for all device alerts.
l
Dell PowerConnect W-AirWave 7.6 | User Guide
Description
This trigger type is based on the disk usage of AirWave. This type of trigger indicates that disk usage for
the AirWave server has met or surpassed a defined threshold. Select Add New Trigger Condition to
specify the disk usage characteristics that trigger an alert.
Set one of these triggers at 90% so you receive a warning before AirWave suffers performance
degradation due to lack of disk space.
to create a new trigger.
.
"Creating New
Figure
132:
Performing Daily Administration in AirWave | 199

Advertisement

Table of Contents
loading

Table of Contents