Using The System > Performance Page - Dell PowerConnect W-AirWave 7.6 User Manual

Figure 156:
System > Firmware Upgrade Jobs Page Illustration
You can perform the following operations on this page:
To restart failed firmware upgrade jobs, select the checkboxes next to the rows you want to restart and select the
l
Restart Failed Jobs button.
To stop a pending upgrade job and remove it from the list, select the Cancel and Delete Jobs button.
l
Use additional links on the page as shortcuts to the Device Setup > Upload Firmware & Files page, or the
l
complete raw text of the Firmware Server Log
To view additional details about an individual upgrade job including the devices being upgraded, select the name
l
of an upgrade job from the Name column to go to the System > Firmware Upgrade Job Detail page, illustrated
in Figure 157.
From here you can click the device name to go to its APs/Devices > Monitor page, or the link under Firmware
File column to go to the Device Setup > Upload Firmware & Files page.
Figure 157:
System > Firmware Upgrade Job Detail Page Illustration
Refer also to "Loading Device Firmware Onto AirWave (optional)" on page
Using the System > Performance Page
The System > Performance page displays basic AirWave hardware information as well as resource usage over time.
AirWave logs performance statistics such as load average, memory and swap data every minute.
The historical logging is useful to determine the best usable polling period and track the health of AirWave over
time.
The page is divided into four sections:
System Information
l
Performance Graphs
l
Database Statistics
l
Disk Usage
l
Figure 158 illustrates this page, and
226 | Performing Daily Administration in AirWave
Table 122 describes fields and information displayed.
43.
Dell PowerConnect W-AirWave 7.6 | User Guide