Dell PowerConnect W-AirWave 7.6 User Manual page 146

Field
Status
Configuration
Last Contacted
Type
Firmware
Group
Template
Folder
Management Mode
Enable Planned
Maintenance Mode
Notes
3. Review and provide the following information in the Settings area. Devices with dual radios display radio-specific
settings in the Slot A and Slot B area. If a device is dual-radio capable but only has one device installed, AirWave
manages that device as if it were a single slot device.
NOTE: Devices from different vendors have different RF settings and capabilities. The fields in the Settings section of the APs/Devices
> Manage page are context-sensitive and only present the information relevant for the particular device vendor and model.
Table 81 describes field settings, default values, and information for the Settings section of this page.
Table 81:
APs/Devices > Manage > Settings Fields and Default Values
Setting
Name
Domain Name
Location
134 | Discovering, Adding, and Managing Devices
Description
Displays the current status of an AP. If an AP is Up, then AirWave is able to ping it and fetch
SNMP information from the AP. If the AP is listed Down then AirWave is either unable to ping the
AP or unable to read the necessary SNMP information from the device.
Displays the current configuration status of the AP. To update the status, select Audit on the
APs/Devices > Audit page.
Displays the last time AirWave successfully contacted the AP.
Displays the type of AP.
Displays the version of firmware running on the AP.
Links to the Group > Monitoring page for the AP.
Displays the name of the group template currently configuring the AP. This also displays a link to
the Groups > Template page. This is only visible for APs that are managed by templates.
Displays the name of the folder containing the AP. Also displays a link to the APs/Devices > List
page for the folder.
Displays the current management mode of the AP. No changes are made to the AP when it is in
Monitor Only mode. AirWave pushes configurations and makes changes to an AP when it is in
Manage Read/Write mode.
Put this device into planned maintenance. During the maintenance mode, no AP Down triggers
will be deployed on these devices. Users will not be able to delete folders that contain devices in
Planned Maintenance. The devices in Planned Maintenance will show the Up status, but will not
be tracked in historical graphs and logs as Up. You can set multiple devices into Planned
Maintenance Mode in the Modify Devices link on an AP list page.
Provides a free-form text field to describe device information.
Default Device Type
None All
None IOS
Read from All
Description
User-configurable name for the device (max. 20 characters)
Field populated upon initial device discovery or upon refreshing
settings. Enable this option from AMP Setup > Network page to
display this field on the APs/Devices > Manage page, with fully-
qualified domain names for IOS APs. This field is used in
conjunction with Domain variable in IOS templates.
The SNMP location set on the device.
Dell PowerConnect W-AirWave 7.6 | User Guide