Downloading Snmp Management Information Base (Mib) File; First Steps To Troubleshoot A Remote System; Power Troubleshooting - Dell PowerEdge VRTX User Manual

Subsystem
General System/RAC information
Session information
Sensor information
Switches information (IO Module)
Mezzanine card information (Daughter card)
All modules information
Power budget information
KVM information
NIC information (CMC module)
Redundancy information
Trace log information
RAC event log
System event log

Downloading SNMP Management Information Base (MIB) File

The CMC SNMP MIB file defines the chassis types, events, and indicators. CMC enables you to download the MIB file
using the web interface.
To download the CMC's SNMP Management Information Base (MIB) file using the CMC web interface:
1. In the left pane, click Chassis Overview → Network → Services → SNMP.
2. In the SNMP Configuration section, click Save to download the CMC MIB file to your local system.
For more information about the SNMP MIB file, see the
Guide at dell.com/support/manuals.

First Steps to Troubleshoot a Remote System

The following questions are commonly used to troubleshoot high-level issues in the managed system:
• Is the system turned on or turned off?
• If turned on, is the operating system functioning, not responding, or stopped functioning?
• If turned off, did the power turn off unexpectedly?

Power Troubleshooting

The following information helps you to troubleshoot power supply and power-related issues:
• Problem: Configured the Power Redundancy Policy to AC Redundancy, and a Power Supply Redundancy Lost
event was raised.
– Resolution A: This configuration requires at least one power supply in side 1 (the left two slots) and one
power supply in side 2 (the right two slots) to be present and functional in the modular enclosure.
Additionally the capacity of each side must be enough to support the total power allocations for the
170
RACADM Command
getsysinfo
getssninfo
getsensorinfo
getioinfo
getdcinfo
getmodinfo
getpbinfo
getkvminfo
getniccfg
getredundancymode
gettracelog
getraclog
getsel
Dell OpenManage Server Administrator SNMP Reference