Dell PowerConnect W-AirWave 7.6 User Manual page 229

Figure 149:
Home > Overview Page Illustration
Table 119:
Home > Overview Sections and Charts
Section
Clients
Usage
Monitoring
Status
Configuration
Compliance
Alert Summary
Dell PowerConnect W-AirWave 7.6 | User Guide
Description
This chart is a graphical summary of the number of users on the network during a period of time. The
time can be adjusted. Select Show All to display a list of data series that this graph can display, such as
the user count by SSID.
Clear the Max Clients or Avg Clients checkbox to change the display of the graph. The graph displays the
maximum number of users by default. To view historical graphs in a new window, select the three-bar
icon on the upper right of the chart.
This adjustable chart displays bandwidth data over time. To remove bandwidth in or out from the
graphical display, clear the check box for Avg Bits Per Second In or Out.
To display details for specific devices, select Show All and select the devices to be included in the
graphical bandwidth summary chart. To view historical graphs in a new window, select the three-bar
icon on the upper right of the chart.
This pie chart shows the percentage of all devices that are up and down on the network. To review
devices that are down, select Down in the legend or the chart, and the APs/Devices > Down page
displays.
The pie chart displays all known device configuration status on the network. Devices are classified as
Good, Unknown, Mismatched, or Audit Disabled. Select the Mismatched link to see the APs/Devices >
Mismatched page.
This section displays all known and current alerts configured and enabled in the System > Alerts page
(refer to "Viewing, Delivering, and Responding to Triggers and Alerts" on page
sorted using the column headers (Type, Last 2 Hours, Last Day, Total, or Last Event). The Alert Summary
field displays three types of alerts:
191). Alerts can be
Performing Daily Administration in AirWave | 217