Setting Up Rapids; Rapids Setup; Basic Configuration - Dell PowerConnect W-AirWave 7.6 User Manual

Hide thumbs Also See for PowerConnect W-AirWave 7.6:
Table of Contents

Advertisement

Table 91:
RAPIDS > Overview Fields and Descriptions
Summary
IDS Events
Device Count by
RAPIDS
Classification
RAPIDS
Classification
RAPIDS Devices by
OS
Operating System
Acknowledged
RAPIDS Devices
RAPIDS Changes

Setting Up RAPIDS

The RAPIDS > Setup page allows you to configure your AirWave server for RAPIDS. Complete the settings on this
page as desired, and select Save. Most of the settings are internal to the way that AirWave will process rogues.
Refer to the following sections:
"RAPIDS Setup" on page 171
l
"Additional Settings" on page 174
l

RAPIDS Setup

Basic Configuration

On the RAPIDS > Setup page, the Basic Configuration section allows you to define RAPIDS behavior settings.
The figure below illustrates this page, and the tables that follow describe the fields.
Dell PowerConnect W-AirWave 7.6 | User Guide
Description
Displays a list of attack types for the designated folder and subfolders. Field displays events from the
past two hours, the past 24 hours, and total IDS events. Names of attacks link to summary pages with
more details.
NOTE: AirWave should be configured as the SNMP trap receiver on the controllers to receive IDS
traps. See the Dell PowerConnect W-AirWave 7.6 Best Practices Guide for details.
A pie chart of rogue device percentages by RAPIDS classification.
A summary list with details of the statistics depicted in the Device Count by RAPIDS Classification pie
chart. Click the linked classification name to be taken to a filtered rogue list.
A pie chart of RAPIDS percentages by the detected operating system.
Detected operating systems represented in this summary listing. Click on the linked Operating System
name to see the rogues list filtered by that classification.
OS scans can be run manually or enabled to run automatically on the RAPIDS > Setup page.
A color coded pie chart comparing the number of acknowledged devices to the unacknowledged
devices.
Tracks every change made to RAPIDS including changes to rules, manual classification, and
components on the RAPIDS > Setup page. A link at the top of the list directs you to the RAPIDS > Audit
Log page.
Using RAPIDS and Rogue Classification | 171

Advertisement

Table of Contents
loading

Table of Contents