Using The Configuration Audit Report - Dell PowerConnect W-AirWave 7.6 User Manual

Figure 169:
Client Session Detail Partial View

Using the Configuration Audit Report

The Configuration Audit Report provides an inventory of device configurations on the network, enabling you to
display information one device at a time, one folder at a time, or one device group at a time. This report links to
additional configuration pages.
Perform these steps to view the most recent version of the report, then to configure a given device using this report.
1. Navigate to the Reports > Generated page.
2. Scroll to the bottom, and select Latest Configuration Audit Report to display Detail device configuration
information for all devices. The ensuing Detail report can be very large in size, and provides multiple links to
additional device configuration or information display pages.
3. You can display device-specific configuration to reduce report size and to focus on a specific device. When
viewing configured devices on the Detail page, select a device in the Name column. The device-specific
configuration appears.
4. You can create or assign a template for a given device from the Detail page. Select Add a Template when viewing
device-specific configuration information.
5. You can audit the current device configuration from the Detail page. Select Audit when viewing device-specific
information.
6. You can display archived configuration about a given device from the Detail page. Select Show Archived Device
Configuration.
Figure 170 and Table 129
Dell PowerConnect W-AirWave 7.6 | User Guide
illustrate and describe the general Configuration Audit report and related contents.
Creating, Running, and Emailing Reports | 243