Using The Settings In The Visualrf > Setup Page - Dell PowerConnect W-AirWave 7.6 User Manual

Figure 198:
APs in a mesh network
Select an AirMesh AP icon to bring up the popup menu showing the Mesh Node Properties by default. This window
shows the node's name, MeshID, MAC, Manufacturer, and other information. Clicking the blue Monitor link inside
this window opens the APs/Devices > Monitor page in a new tab. Clicking the blue Manage link inside this
window opens the APs/Devices > Manage page for this AP in a new tab.
Figure 199:
Properties for a Mesh Gateway Illustration
For radio-level status information on an AirMesh device in your network, select the menus in the AP's popup
window for each radio (11na Radio, Access; 11na Radio, Mesh; and so forth).
Using the Settings in the VisualRF > Setup Page
The VisualRF > Setup page, illustrated in
these settings very carefully because these settings can impact your server's performance as well as your location
accuracy.
NOTE: Selecting Save will cause VisualRF to restart, disrupting or delaying the usability. This delay can last anywhere from a minute
to upwards of 30 minutes, depending on the size of the VisualRF database.
272 | Using VisualRF
Figure 200, configures advanced settings for VisualRF. Please reconfigure
Dell PowerConnect W-AirWave 7.6 | User Guide