Configuring Radio Settings For Device Groups - Dell PowerConnect W-AirWave 7.6 User Manual

Setting
(Proxim Only)
Accounting Profile Index
(Proxim Only)
10. Select Add when you have completed all sections. This returns you to the Groups > SSIDs page.
What Next?
Select Save to retain these SSID configurations for the group, select Save and Apply to make the changes
l
permanent, or select Revert to discard all unapplied changes.
Continue with additional Group procedures in this document as required.
l

Configuring Radio Settings for Device Groups

The Groups > Radio configuration page allows you to specify detailed RF-related settings for devices in a particular
group.
NOTE: If you have existing deployed devices, you may want to use the current RF settings on those devices as a guide for configuring
the settings in your default Group.
Perform the following steps to define RF-related radio settings for groups.
1. Go to the Groups > List page and select the group for which to define radio settings by selecting the group
name. Alternatively, select Add from the Groups > List page to create a new group, define a group name. In
either case, the Monitor page appears.
2. Go to the Groups > Radio page.
Figure 44:
Groups > Radio Page Illustration
3. Locate the Radio Settings area and adjust these settings as required.
values.
78 | Configuring and Using Device Groups
Default Description
None Sets the Accounting Profile Index for Proxim AP-600, AP-700, AP-2000, AP-4000.
Figure 44 illustrates this page.
Table 60 describes the settings and default
Dell PowerConnect W-AirWave 7.6 | User Guide