Dell PowerConnect W-AirWave 7.6 User Manual page 40

Figure 17:
AMP Setup > Users > Add/Edit User Page Illustration
3. Enter or edit the settings on this page.
Table 17:
AMP Setup > Users > Add/Edit User Fields and Default Values
Setting
Username
Role
Password
Name
Email
Address
Phone
Notes
4. Select Add to create the new user, Save to retain changes to an existing user, or Cancel to cancel out of this
screen. The user information you have configured appears on the AMP Setup > Users page, and the user
propagates to all other AirWave pages and relevant functions.
28 | Configuring AirWave
Table 17
Default Description
Sets the username as an alphanumeric string. The Username is used when logging in to
None
AirWave and appears in AirWave log files.
Specifies the user's Role, which defines the Top viewable folder as well as the type and access
level of the user specified in the previous field.
None
The admin user defines user roles on the AMP Setup > Roles page, and each user in the system
is assigned to a role.
Sets the password for the user being created or edited. Enter an alphanumeric string without
spaces, and enter the password again in the Confirm Password field.
None
NOTE: Because the default user's password is identical to the name, it is strongly recommended
that you change this password. Changing your password will log you out.
Allows you to define an optional and alphanumeric text field that takes note of the user's actual
None
name.
Allows you to specify a specific email address that will propagate throughout many additional
None
pages in AirWave for that user, including reports, triggers, and alerts.
None Allows you to enter an optional phone number for the user.
Enables you to cite any additional notes about the user, including the reason they were granted
None
access, the user's department, or job title.
describes these settings in additional detail.
Dell PowerConnect W-AirWave 7.6 | User Guide