Automatically Provisioning Aps Onto A Floor Plan - Dell PowerConnect W-AirWave 7.6 User Manual

Figure 236:
Provisioning APs onto the Floor Plan
8. After all APs are provisioned on the floor plan, select Save (floppy disk icon) in the top right of the QuickView
window.
NOTE: The floor is submitted to one of the core threads to recalculate path loss and then to one of the location caching threads to
recalculate client locations. All changes may not be visible on a refresh until this process complete.

Automatically Provisioning APs onto a Floor Plan

To automatically provision your access points onto your floor plan:
1. Select Draw Region from the Edit menu. A new provisioning popup appears as shown in the following figure.
302 | Using VisualRF Dell PowerConnect W-AirWave 7.6 | User Guide