Dell PowerConnect W-AirWave 7.6 User Manual page 117

4. For future scans, select the Show Scheduling Options link and enter the desired date and time to schedule a
future scan.
5. After several minutes have passed, refresh the browser page and view the results of the scan. When the Start and
Stop columns display date and time information, the scan is available to display the results.
6. Select the pencil icon for the scan to display the results.
information.
Table 69:
Device Setup > Discover > Discovery Execution Fields
Column
Network
Credentials
Total Devices Found
New Devices Found
Total Rogues Found
New Rogues Found
Start
Stop
Scheduled
7. Go to the APs/Devices > New page to see a full list of the newly discovered devices that the scan detected.
Figure 70 illustrates this page.
NOTE: This page is only visible to users with the AirWave Administrator role or roles that have Allow authorization of APs/Devices
enabled in AMP Setup > Roles.
Figure 70:
APs/Devices > New Page Illustration
What Next?
To authorize one or more devices to a group, see
l
Page" on page
Dell PowerConnect W-AirWave 7.6 | User Guide
Description
Displays the network to be scanned.
Displays the credentials used in the scan.
Displays the total number of APs detected during the scan that AirWave can configure and monitor.
Total includes both APs that are currently being managed by AirWave as well as newly discovered
APs that are not yet being managed.
Displays the number of discovered APs that are not yet managed, but are available.
Displays the total number of APs detected during the scan that AirWave could not configure or
monitor. Total includes both APs that have been discovered in earlier scans as well as newly
discovered APs from the most recent scan.
Displays the number of rogue APs discovered on the most recent scan.
Displays the date and time the most recent scan was started.
Displays the date and time the scan most recently completed.
Displays the scheduled date and time for scans that are scheduled to be run.
106.
Table 69 describes the scan results and related
"Authorizing Devices to AirWave from APs/Devices > New
Discovering, Adding, and Managing Devices | 105