Dell PowerConnect W-AirWave 7.6 User Manual page 43

Setting
Dell Controller Role
Allow user to disable
timeout
Custom Message
Table 19:
AMP Setup > Roles > Add/Edit Roles Fields and Default Values for AP/Device Manager Role
Setting
Name
Enabled
Type
AP/Device
Access Level
Top Folder
Allow
authorization
of
APs/Devices
RAPIDS
Dell PowerConnect W-AirWave 7.6 | User Guide
Default Description
Enables or disables Single Sign-On for the role. If enabled, allows the role to
directly access Dell controller UIs from the Quick Links or IP Address hypertext
Disabled
throughout AirWave without having to enter credentials for the controller.
No Whether a user can disable AirWave's timeout feature.
none A custom message can also be included.
Default Description
Sets the administrator-definable string that names the role. The role name should indicate the
None
devices and groups that are viewable, as well as the privileges granted to that role.
Disables or enables the role. Disabling a role prevents all users of that role from logging in to
Yes
AirWave.
Defines the type of role.
AP/Device
AP/Device Manager—AP/Device Managers have access to a limited number of devices and
Manager
groups based on the Top folder and varying levels of control based on the Access Level.
Defines the privileges the role has over the viewable APs. AirWave supports three privilege
levels, as follows:
Manage (Read/Write)—Manage users can view and modify devices and Groups.
l
Selecting this option causes a new field, Allow authorization of APs/Devices, to appear
on the page, and is enabled by default.
Monitor
(Read Audit (Read Only)—Audit users have read only access to the viewable devices and
l
Only) Groups. Audit users have access to the APs/Devices > Audit page, which may contain
sensitive information including AP passwords.
Monitor (Read Only)—Monitor users have read-only access to devices and groups and
l
VisualRF. Monitor users cannot view the APs/Devices > Audit page which may contain
sensitive information, including passwords.
Defines the highest viewable folder for the role. The role is able to view all devices and
groups contained by the specified top folder. The top folder and its subfolders must contain
all of the devices in any of the groups it can view.
NOTE: AirWave enables user roles to be created with access to folders within multiple
Top branches of the overall hierarchy. This feature assists non-administrator users who support a
subset of accounts or sites within a single AirWave deployment, such as help desk or IT staff.
User roles can be restricted to multiple folders within the overall hierarchy, even if they do
not share the same top-level folder. Non-administrator users are only able to see data and
users for devices within their assigned subset of folders.
NOTE: This option is only available when the AP/Device Access Level is specified as Manage
Yes
(Read/Write).
Sets the RAPIDS privileges, which are set separately from the APs/Devices. This field
specifies the RAPIDS privileges for the role, and options are as follows:
None
None— Cannot view the RAPIDS tab or any Rogue APs.
l
Read Only—The user can view the RAPIDS pages but cannot make any changes to rogue
l
Configuring AirWave | 31