Defining Graph Display Preferences; Customizing The Dashboard - Dell PowerConnect W-AirWave 7.6 User Manual

Defining Graph Display Preferences

Many of the graphs in AirWave are Flash-based, which allows you to adjust the graph settings attributes as shown in
Figure 9.
Figure 9:
Interactive Graphs on the Home > Overview Page
This Flash-enabled GUI allows for custom settings and adjustments as follows:
Drag the slider at the bottom of the screen to move the scope of the graph between one year ago and the current
l
time.
Drag the slider between graphs to change the relative sizes of each.
l
Deselect checkboxes to change the data displayed on each graph. The button with green arrows refreshes data on
l
the graph.
The Show All link displays all of the available checkboxes supporting the Flash graphs. Once a change to the slider
bars has been made, the same change can be applied to all other Flash graphs on that page with a Set time range
button ( ).
NOTE: A non-Flash version of the AirWave user page is available if desired. Instead of Flash, it uses the RRD graphs that were used in
earlier versions of AirWave. For non-Flash graphs, select the graph to open a popup window that shows historical data. Contact Dell
support for more information on activating this feature in the AirWave database.

Customizing the Dashboard

You can rearrange or remove widgets appearing on the Home > Overview dashboard by selecting the Customize link
to the right of this window, as shown in
Figure 10:
Customize Button on the Home > Overview Page
The Customize workspace that appears is shown in
10 | Configuring AirWave
Figure 10.
Figure 11.
Dell PowerConnect W-AirWave 7.6 | User Guide