Appendix A: Add Storage Capacity; Prepare System For Storage Expansion; Install And Connect The New Storage - Dell EMC PowerProtect DD6400 System Expansion Manuallines

The system supports capacity expansion operations by adding new disk shelves while the system is powered on. The chapter
contained in this part provides overview information and instructions to verify the system health before adding storage to the
system.
Topics:
•

Prepare system for storage expansion

•

Install and connect the new storage

• Verify and configure the new disks
•
License the new storage with electronic licensing
• Expand the file system
Prepare system for storage expansion
About this task
Verify the system is healthy and ready for expansion before proceeding with the upgrade procedure.
Steps
1. Log in as a sysadmin user.
2. Display the current alerts on the system.
Run the following command: alerts show current
# alerts show current
No active alerts.
3. Resolve all displayed alerts.
4. Run the filesys disable command to disable the file system.
Install and connect the new storage
Verify a license exists for the new capacity before attempting to add it to the system.
Complete the following tasks to add new storage capacity to the system.
Install the new disk shelves in the rack
Complete the steps in Install the Disk Shelves in the Rack
Cabling diagrams
Connect Cables and Power On
on page 19 to install a new disk shelf in the rack.
on page 25 provides cabling diagrams, and instructions.
Add Storage Capacity
Add Storage Capacity
A
43