Table of Contents
Advertisement
11. Follow the procedure in
Display assembly
Removing display assembly
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
c.
WLAN
3. To disconnect the display cable:
a. Release the WLAN cable from the routing channels [1].
b. Remove the M2*5 screw that secures the display cable bracket to the computer [2].
c. Remove the display cable bracket that secures the display cable [3].
d. Disconnect the display cable and IR camera cable from the connectors on the system board [4][5].
4. Place the computer on the edge of a plane surface with the display facing down.
5. To remove the display assembly:
a. Remove the M2*5 screws that secure the display assembly to the computer [1].
b. Lift the display assembly away from the computer [2].
After working on your thin
Before working on your thin
client.
client.
Disassembly and reassembly
43
Advertisement
Table of Contents
