L2 Switch > Vlan Membership - Cisco RVS4000 - Gigabit Security Router Administration Manual

Setting Up and Configuring the Router
L2 Switch
Cisco RVS4000 Security Router with VPN Administrator Guide
L2 Switch > VLAN Membership
L2 Switch > VLAN Membership
VLAN ID Select the VLAN whose membership you want to configure.
Description Enter a VLAN group name of up to 50 characters.
Function/Port table
(Untagged, Tagged, or Trunk). The lower half of the table is used to assign port
membership for the selected VLAN. The default for each port is Exclude (the port
is not a member of the VLAN). To make a port a member of the VLAN, select the
applicable mode(s). For example, if the port mode is Untagged, select Untagged; if
the mode is Tagged, select Tagged; if the mode is Trunk, select either Tagged or
Untagged.
The top half of the table indicates each port's current mode
5
89