10/100/1000 Ports; Poe, Poe+, And Cisco Upoe Ports - Cisco Catalyst 9300 Series Hardware Installation Manual

Product Overview
The Catalyst 9300 switches might have slight cosmetic differences on the bezels.
Note
Figure 1: C9300-48P Switch Front Panel
Figure 2: C9300-48UXM Switch Front Panel
1
2
3

10/100/1000 Ports

The 10/100/1000 ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length is 328 feet
(100 meters). The 100BASE-TX and 1000BASE-T traffic requires twisted pair (UTP) cable of Category 5
or higher. The 10BASE-T traffic can use Category 3 cable or higher.

PoE, PoE+, and Cisco UPoE Ports

The PoE+ and Cisco Universal Power Over Ethernet (Cisco UPoE) ports use the same connectors as described
in 10/100/1000 Port Connections, on page
• PoE+ ports: Support for IEEE 802.3af-compliant powered devices (up to 15.4 W PoE per port) and
• Support for pre-standard Cisco powered devices.
• Support Cisco UPOE powered devices (up to 60W PoE per port). The maximum total PoE power in a
• Configuration for StackPower. When the switch internal power supply module(s) cannot support the
Beacon LED (UID button)
Status LEDs
USB mini-Type B (console) port
support for IEEE 802.3at-compliant powered devices (up to 30 W PoE+ per port).
1RU switch is 1800W.
total load, StackPower configurations allow the switch to leverage power available from other switches.
4 USB Type A storage port
5 10/100/1000 PoE+ ports
6 Network module slots
37. They provide:
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
10/100/1000 Ports
3