Viewing Logs - Cisco RV215W Administration Manual

Viewing the Status

Viewing Logs

STEP 3
Viewing Logs
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 2—Cisco Confidential
• Duration—Displays the elapsed time for which the connection is or was
active.
• Packet—Displays the received (Rx) and transmitted (Tx) packets on the
connection.
• Byte—Displays the received (Rx) and transmitted (Tx) bytes on the
connection.
• State—Displays the state of the connection (for example, active or not
connected).
• Action—Displays actions you can perform on the connection (for example,
disconnect).
If you made any changes, click Save.
The View Logs page displays the Cisco RV215W logs.
To view the logs, choose Status > View Logs.
To display the latest log entries, click Refresh Logs.
To filter logs or specify the severity of logs to display, check the boxes next to the
log type and click Go. Note that all log types above a selected log type are
automatically included and you cannot deselect them. For example, choosing
"error" logs automatically includes emergency, alert, and critical logs in addition to
error logs.
The event severity levels are listed from the highest severity to the lowest severity,
as follows:
• Emergency—System is not usable.
• Alert—Action is needed.
• Critical—System is in a critical condition.
• Error—System is in error condition.
• Warning—System warning occurred.
• Notification—System is functioning properly, but a system notice occurred.
2
11