Chapter 10 Overhead Accounting; C H A P T E R 11 Managing Packet Queue Congestion; C H A P T E R 12 Sharing Bandwidth Fairly During Congestion; C H A P T E R 13 Defining Qos For Multiple Policy Levels - Cisco 10000 Series Configuration Manual

About This Guide
Chapter Title
Chapter 10 Overhead Accounting
Chapter 11 Managing Packet Queue Congestion
Chapter 12 Sharing Bandwidth Fairly During
Congestion
Chapter 13 Defining QoS for Multiple Policy Levels Describes the types of hierarchical policies supported and how
Chapter 14 Simultaneous Policy Maps
Chapter 15 Oversubscribing Physical and Virtual
Links
Chapter 16 Fragmenting and Interleaving Real-Time
and Nonreal-Time Packets
Chapter 17 Configuring Dynamic Subscriber
Services
Chapter 18 Regulating Subscriber Traffic
Chapter 19 Configuring Quality of Service for PVC
Bundles
Chapter 20 Configuring Quality of Service for MPLS
Traffic
Chapter 21 VLAN Tag-Based Quality of Service
OL-7433-09
Description
Describes the overhead accounting features supported on the
router.
Describes the mechanisms used to control packet queue
congestion.
Describes the Class-based Weighted Fair Queuing (CBWFQ)
feature and explains how to configure it.
to configure them.
Describes how to simultaneously configure policy maps on
sessions and interfaces.
Describes interface, virtual circuit, and virtual LAN (VLAN)
oversubscription and how to configure it. Also describes VC
weighting.
Describes fragmentation and interleaving on the router and how
to configure it.
Describes how to use the following features:
Dynamic Bandwidth Selection (DBS) feature—Apply
•
traffic shaping parameters using RADIUS profiles
Define Interface Policy-Map AV Pairs AAA
•
feature—Apply QoS parameters dynamically to sessions
DBS Extension—VC Weight and Watermarks—Modify
•
existing VC weight and watermark values without tearing
down and recreating the VC
Per Session Queuing and Shaping for PPPoE Over VLANs
•
Using RADIUS feature—Dynamically apply queuing and
shaping policies to PPPoE over VLAN sessions
Per Session Shaping and Queuing on LNS—Shape or queue
•
the traffic from an Internet service provider (ISP) to an ISP
subscriber over a Layer 2 Tunneling Protocol (L2TP)
Network Server (LNS).
• PPP Session Queuing on ATM Virtual Circuits—Shape and
queue PPP over ATM (PPPoA) and PPP over Ethernet over
ATM (PPPoEoA) sessions to a user specified rate.
Describes subscriber-based traffic regulating and shaping
features.
Describes PVC bundles and QoS-based PVC selection over
ATM and Frame Relay PVCs.
Describes the MPLS QoS feature and the MPLS Traffic
Engineering—DiffServ Aware feature and how to configure
them.
Describes the VLAN Tag-Based feature that enables you to
apply a single QoS policy to a group of IEEE 802.1Q VLAN
subinterfaces.
Cisco 10000 Series Router Quality of Service Configuration Guide
xli