User Attendance Messages - Lexmark X642e Service Manual
Hide thumbs
Also See for X642e:
- Quick reference (5 pages) ,
- Install manual (4 pages) ,
- Technical reference manual (416 pages)
Table of Contents
Advertisement
7002-xxx
User attendance messages
User attendance messages
Sub
Code
Primary message
code
Change Cartridge
Invalid Refill
Change [src] to
[Custom String]
Change <src> to
<Custom Type Name>
Change [src] to
[size]
Change [src] to
[size] [type]
2-42
Service Manual
Description/action
Select one of the following actions:
Remove the toner cartridge and install a new cartridge.
Lets the user override the current print media source for the remainder of
the print job. The formatted page prints as is on the print media installed in
the tray. This may cause clipping of text or images.
Touch Use current [src] to ignore the message and print on the print media
loaded in the tray.
Touch Continue:
• which continues the job if the correct size and type are loaded in the tray,
and this size and type are specified in the Paper Menu using the
operator panel.
• which is ignored if there is no print media in the tray.
Touch Cancel job to cancel the current job if needed.
New print media is required to finish a print job.
Load the indicated source with the requested size and type of print media.
Touch Continue to print with print media currently in the tray.
Lets the user override the current print media source for the remainder of
the print job. The formatted page prints as is on the print media installed in
the tray. This may cause clipping of text or images.
Touch Use current [src] to ignore the message and print on the print media
loaded in the tray.
Touch Continue:
• which continues the job if the correct size and type are loaded in the tray,
and this size and type are specified in the Paper Menu using the
operator panel.
• which is ignored if there is no print media in the tray.
Touch Cancel job to cancel the current job if needed.
Lets the user override the current print media source for the remainder of
the print job. The formatted page prints as is on the print media installed in
the tray. This may cause clipping of text or images.
Touch Use current [src] to ignore the message and print on the print media
loaded in the tray.
Touch Continue:
• which continues the job if the correct size and type are loaded in the tray,
and this size and type are specified in the Paper Menu using the
operator panel.
• which is ignored if there is no print media in the tray.
Touch Cancel job to cancel the current job if needed.
Advertisement
Table of Contents
