Lexmark X642e Service Manual page 130

7002-xxx
User attendance messages—paper jams and paper handling errors (2xx.xx)
Sub
Code Description
code
260 .13 Paper in envelope
feeder on warm-up.
260 .14 Page was not properly
picked from envelope
feeder.
260 .15 Page was not properly
picked from envelope
feeder.
260 .16 Failed to feed from
envelope feeder. Pages
in the paper path have
been flushed to the
output bin.
290 .00 Static jam—ADF Interval
Sensor
290 .01 ADF Pickup Jam.
290 .02 ADF Feed Jam.
290 .10 Static jam—First Scan
Sensor.
291 .00 Static Jam—Second
Scan Sensor.
291 .01 First ADF Scan Sensor
Jam.
291 .02 Second ADF Scan
Sensor
292 .00 ADF Cover Open Jam
2-92
Service Manual
Possible causes
Paper jam around envelope feeder.
Paper jam around envelope feeder.
Paper jam around envelope feeder.
• The paper may be stuck in the ADF
at or over the interval sensor.
• Interval sensor may be malfunction.
The ADF attempted to stage a page but
the leading edge of the page did not
reach the interval sensor.
The leading edge of the page reached
the interval sensor but did not reach the
first scan sensor.
Paper may be stuck in the ADF at the
first scan sensor or the first scan sensor
may be malfunctioning.
Paper may be stuck in the ADF at the
second scan sensor or the second scan
sensor is not operating properly.
The second sensor detected the leading
edge of the paper but never detected the
training edge. The first scan sensor
detected the trailing edge of the paper.
The first scan sensor has detected the
trailing edge of the page, but the second
scan sensor did not detect the leading
edge of the page.
The ADF cover was opened while the
ADF was scanning.
Action
• Remove feeder and clear
jam.
• Replace feeder.
• Remove feeder and clear
jam.
• Replace feeder.
• Remove feeder and clear
jam.
• Replace feeder.
Go to "290.00 Error code
service check" on page 2-96.
Go to "290.01 Error code
service check" on page 2-98.
Check for proper operation of
the first scan sensor. If the
sensor is opening properly and
no other problem is found, go to
"290.02 Error code service
check" on page 2-100.
Check for any media or
obstruction over the first scan
sensor. If no problem is found,
go to "290.10 Error code
service check" on
page 2-102.
Check for any media or
obstruction over the second
scan sensor. If no problem is
found, go to "291.00 Error
code service check" on
page 2-104.
Go to "291.01 Error code
service check" on
page 2-105.
Clear any media from the ADF
and close the cover. If this does
not fix the problem, then go to
"291.02 Error code service
check" on page 2-106.
Clear any paper from the ADF
and close the cover. If this does
not fix the problem, then go to
"292.00 Error code service
check" on page 2-107.