Lexmark X642e Service Manual page 90

7002-xxx
User attendance messages (continued)
Sub
Code Primary message
code
42 .xy Printer/cartridge
mismatch
PPDS font error
50 .xx
Defective flash
51 .xx
detected
52 .xx Not enough free
space in flash
memory for
resources
53 .xx Unformatted flash
detected
Network [x]
54 .xx
software error
2-52
Service Manual
Description/action
Cartridge region code does not match MFP region code.
x=printer region and y=cartridge region. The following regions may be listed:
Code Region
0 Worldwide
1 USA and Canada
2 Europe, Middle East, and Africa
3 Asia
4 Latin America
9 Undefined region
The MFP has received a request for a font that is not installed when
formatting PPDS print data.
Touch Continue to clear the message and continue printing the current job.
Touch Cancel Job to cancel the current job if needed.
Touch Reset Active Bin to change to another linked bin.
The MFP detects a defective flash memory during power-on or during flash
format and write operations.
Touch Continue to clear the message and continue printing the current job.
At power-on reset, touch Continue to clear the message and the MFP
continues with normal operations except for flash operations.
Install different flash memory to be able to download any resources to flash.
There is not enough space in the flash memory to store the data currently
being downloaded.
Touch Continue to clear the message and continue the print job.
Install flash memory with more storage capacity.
Download the data.
Touch Cancel Job to cancel the current job if needed.
Touch Reset Active Bin to change to another linked bin.
The MFP detects unformatted flash memory.
Touch Continue to clear the message and continue printing. The MFP
continues with normal operations except for flash operations.
Reformat the flash to allow flash operations.
If the error message reappears, the flash memory may be defective and
require replacing.
The MFP cannot establish communications with a specified installed
network port. x indicates the number of the specified port.
• Touch Continue to clear the message and continue printing. The job
may not print correctly.
• The MFP disables attempts to communicate through the network
interface. No data may be sent or received.
• Reset the MFP.
• Program new firmware for the network interface.