To change the size sensing setting:
1.
Touch
2.
The panel displays the setting's name in the header and
row. Touch
3.
Touch Submit to save your change.
Touch Back to exit without changing the value.
Panel Menus
To change the Panel Menus setting:
1.
Touch
2.
The panel displays the setting's name in the header and
row. Touch
3.
Touch Submit to save your change.
Touch Back to exit without changing the value.
PPDS Emulation
This menu item allows the user to enable or disable PPDS emulation data stream. When this setting is enabled,
the following settings are also changed:
•
SmartSwitch settings for each port are turned off.
•
The printer language is changed to PPDS Emulation.
Users can still switch languages on the operator panel and through the PJL data stream.
To change the PPDS Emulation setting:
1.
Touch
2.
The panel displays the setting's name in the header and
row. Touch
Deactivate.
3.
Touch Submit to save your change.
Touch Back to exit without changing the value.
to select SIZE SENSING from the Configuration Menu.
or
to change the setting. The selections are Auto and Off.
to select Panel Menus from the Configuration Menu.
or
to change the setting. The selections are Disable and Enable. The default is Enable.
to select PPDS Emulation from the Configuration Menu.
or
to change the setting. The selections are Activate and Deactivate. The default is
[setting's current value]
[setting's current value]
[setting's current value]
Diagnostic aids
7002-xxx
below the header
below the header
below the header
3-27