Main Drive Assembly Removal - Lexmark X642e Service Manual

Main drive assembly removal

1.
Remove the system board and inner shield. See
X644e/X646e" on page
2.
Remove the screw securing the gear guard (A).
3.
Remove the power take off shaft and spring. See
page 4-126.
4.
Remove the developer drive assembly. See
5.
Lift and remove the cables from the cable hooks (B).
"System board and inner shield removal —models
4-131.
"Power takeoff shaft and spring removal" on
"Developer drive assembly removal" on page
7002-xxx
4-77.
4-113
Repair information