Lexmark X642e Service Manual page 214

7002-xxx
Diagnostics Menu tests (continued)
PRINTER SETUP
Defaults
Printed Page Count
Perm Page Count
Serial Number
Envelope Enhance
Engine Setting 1 to 4
Model Name
Configuration ID
Edge To Edge
Par S Strobe Adj
PAR 1 STROBE ADJ (if additional parallel
options are installed)
EP SETUP
EP Defaults
Fuser Temp
Fuser Page Count
Warm Up Time
Transfer
Print Contrast
Charge Roll
Gap Adjust
EVENT LOG
Display Log
Print Log
Clear Log
SCANNER TESTS
ASIC Test
Feed test
Manual Registration
Sensor Tests
Touch Exit Diag Menu to exit the Diagnostics Menu and Resetting the Printer displays. The printer
performs a POR, and the printer returns to normal mode.
3-4
Service Manual
See "Defaults" on page 3-17
See "Printed Page Count" on page 3-18
See "Permanent Page Count" on page 3-18
See "Serial Number" on page 3-18
See "Envelope Enhance" on page 3-18
See "Engine Setting 1 through 4" on page 3-18
See "Model Name" on page 3-18
See "Configuration ID" on page 3-19
See "Edge to Edge" on page 3-19
See "Parallel strobe adjustment (Par x Strobe Adj)" on
page 3-19
See "EP Defaults" on page 3-20
See "Fuser Temperature (Fuser Temp)" on page 3-20
See "Fuser Page Count" on page 3-20
See "Warm Up Time" on page 3-20
See "Transfer" on page 3-21
See "Print Contrast" on page 3-21
See "Charge Roll" on page 3-21
See "Gap Adjust" on page 3-21
See "Display Log" on page 3-21
See "Print Log" on page 3-22
See "Clear Log" on page 3-22
See "ASIC Test" on page 3-23
See "Feed Test" on page 3-23
See "Scanner Manual Registration" on page 3-23
See "Sensor Tests" on page 3-23
Exit
Exit
Diag Menu
Diag Menu