Lexmark X642e Service Manual page 79

User status displays (continued)
Sub
Display text
Code code
Answering
Call complete
Connect <x>bps
Dialing
Fax failed
Job stored for
delayed
transmission.
Line busy
No answer
No dial tone
Queued for sending
Receive complete
Receiving page [n]
Sending page [n]
Set clock
Waiting for redial
Description/action
The MFP is answering a fax call.
A fax call is completed.
The fax is connected. <x> is the baud rate per second.
A fax number is dialed. If the number is too long to fit on the screen only the
word Dialing appears.
The fax failed to send.
The scanning completes for a delayed send fax job.
A fax number is dialed, but the fax line is busy.
A fax number is dialed, but no connection is made.
The MFP does not have a dial tone.
The scanning process of a fax job completed, but it is not sent yet because
another fax job is being sent or received. As this one job waits for its turn,
this message appears for three seconds.
The MFP has received an entire fax job.
The MFP receives page [n] of the fax job, where n is the number of the page
received.
The MFP sends page [n] of the fax job, where n is the number of the page
sent.
The Real Time Clock is not set. This message appears if no other fax status
message appears. It remains until the clock is set.
Set the clock.
The MFP is waiting to redial the fax number.
7002-xxx
2-41
Diagnostic information