Configuration Menu (Config Menu); Entering Configuration Menu; Available Menus - Lexmark X642e Service Manual

7002-xxx

Configuration menu (CONFIG MENU)

Entering Configuration Menu

1.
Turn off the printer.
2.
Press and hold 2 and 6 buttons simultaneously.
3.
Turn on the printer.
4.
Release the buttons after 10 seconds.

Available menus

Note: Some menus are not available, depending on the configuration of the printer.
Maintenance Page Counter
Reset Maintenance Counter
Print Quality Pages
SIZE SENSING
Panel Menus
PPDS Emulation
Factory Defaults
Energy Conserve
Min Copy Memory
Format Fax Storage
ADF Edge Erase
FB Edge Erase
Automatic Scanner Registration
EVENT LOG (print log only)
Paper Prompts
Env Prompts
Jobs On Disk
Disk Encryption
Wipe Disk
Font Sharpening
Require Standby
LES App[lications
Key Repeat Initial Delay
Key Repeat Rate
Wiper Message
Touch Exit Config Menu to exit the Configuration Menu and Resetting the Printer displays. The printer
performs a POR, and the printer returns to normal mode.
3-24
Service Manual
See "Maintenance Page Count" on page 3-25
See "Reset Maintenance Counter" on page 3-25
See "Print Quality Pages" on page 3-26
See "SIZE SENSING" on page 3-26
See "Panel Menus" on page 3-27
See "PPDS Emulation" on page 3-27
See "Factory Defaults" on page 3-28
See "Energy Conserve" on page 3-28
See "Min Copy Memory" on page 3-29
See "Format Fax Storage" on page 3-29
See "ADF Edge Erase" on page 3-29
See "FB Edge Erase" on page 3-30
See "Automatic Scanner Registration" on page 3-30
See "EVENT LOG" on page 3-31
See "Paper Prompts" on page 3-31
See "Envelope Prompts" on page 3-32
See "Jobs On Disk" on page 3-32
See "Disk Encryption" on page 3-32
See "Wipe Disk" on page 3-33
See "Font Sharpening" on page 3-34
See "Require Standby" on page 3-34
See "LES Applications" on page 3-34
See "Key Repeat Initial Delay" on page 3-35
See "Key Repeat Rate" on page 3-35
See "Wiper Message" on page 3-35
Exit
Exit
Config Menu
Config Menu