Lexmark X642e Service Manual page 92

7002-xxx
User attendance messages (continued)
Sub
Code Primary message
code
58 Too many disks
installed
Too many flash
58
options installed
Too many trays
58 .xx
attached
59 .xx Incompatible
duplex
Incompatible
59 .xx
envelope feeder
59 .xx Incompatible tray
[x]
61 .xx Remove defective
disk
2-54
Service Manual
Description/action
Model X646e only. The MFP detects an excess of hard disks installed.
1. Turn the MFP off.
2. Unplug the power cord from the wall outlet.
3. Remove the excess hard disks.
4. Connect the power cord to a properly grounded outlet.
5. Turn the MFP on.
The MFP detects an excess of optional flash memory cards installed.
Touch Continue to clear the message and ignore the extra optional flash
memory cards.
The message occurs again unless the excess optional flash memory cards
are removed.
1. Turn the MFP off.
2. Unplug the power cord from the wall outlet.
3. Remove the excess flash memory.
4. Connect the power cord to a properly grounded outlet.
5. Turn the MFP on.
The MFP detects that too many optional drawers and their matching trays
are installed.
1. Turn the MFP off.
2. Unplug the power cord from the wall outlet.
3. Remove the additional drawers.
4. Connect the power cord to a properly grounded outlet.
5. Turn the MFP on.
An unsupported optional duplex unit is attached to the MFP.
Remove the optional duplex unit.
The MFP ceases normal functions until the optional duplex unit is removed.
Touch Continue to clear the message once the optional duplex unit is
removed.
An unsupported optional envelope feeder is attached to the MFP.
Remove the optional envelope feeder.
The MFP ceases normal functions until the optional envelope feeder is
removed.
Touch Continue to clear the message once the optional envelope feeder is
removed.
An unsupported optional drawer and its matching tray are attached to the
MFP.
Remove the optional drawer.
The MFP ceases normal functions until the optional drawer is removed.
Touch Continue to clear the message once the optional drawer is removed.
Model X646e only. The MFP detects a defective hard disk.
1. Turn the MFP off.
2. Unplug the power cord from the wall outlet.
3. Remove the defective hard disk.
4. Install a new hard disk.
5. Connect the power cord to a properly grounded outlet.
6. Turn the MFP on.