Messages And Error Codes; Service Error Codes; Sub Error Codes For 8Xx, 9Xx, And 2Xx Error Codes - Lexmark X642e Service Manual

Hide thumbs Also See for X642e:
Table of Contents

Advertisement

Messages and error codes

Service error codes

Service error codes are generally non-recoverable except in an intermittent condition when you can POR the
printer to temporarily recover from the error condition.
Service error codes are indicated by a three-digit error code followed by a period and additional numbers in the
format XXX.YY. In most cases, five digits are shown. Additional sub error codes display if you press and hold
Start (
) and 2 when an error message is displayed. Not all error conditions have additional sub error
information.

Sub error codes for 8xx, 9xx, and 2xx error codes

The sub error codes are helpful troubleshooting a paper path problem, especially paper jams in the printer,
envelope feeder, and duplex option.
To display sub error codes (where available)
When a 9xx or 2xx error displays:
1.
Press and hold Start (
The first screen of information displays. Write down the information.
2.
Continue pressing Start and 2 until each screen of information is obtained.
3.
When the last screen displays, the original message displays.
Printed error codes
Additional information is available by printing the error log. See
Service error codes (8xx.xx)
Error
Sub
Display text
code
codes
842
.xx
Service Scanner
843
.xx
Service Scanner
845
.00
Service Image
Processing Unit
848
.00
Modem/Config ID
Mismatch
848
.01
Modem/Config ID
Mismatch
) and 2 to view for sub error codes.
Description
This error indicates that a scanner
communications failure.
This error indicates that a problems
has been detected with the flatbed
carriage mechanical hardware. It
may also indicate interference
between the flatbed CCD assembly
and a metal bracket.
This error code indicates a failure of
the image processing ASIC.
There is no modem installed on a
modem version of the MFP.
Modem is present on a no modem
version of the MFP.
"Print Log" on page
3-22.
Action
Go to
"842.xx Error code service
check" on page
Go to
"843.xx Error code service
check" on page
Replace the scanner control card
(SCC). See
"Scanner control card
removal" on page
Check to see if a modem card is
installed in the MFP. If no modem is
installed, install a modem card. If the
modem is installed, go to
Error code service check" on
page
2-118.
Remove the modem that has been
installed as this MFP does not
support a modem.
Diagnostic information
7002-xxx
2-115.
2-116.
4-48.
"848.00
2-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

X644eX646e

Table of Contents