Lexmark X642e Service Manual page 83

User attendance messages (continued)
Sub
Code Primary message
code
Install Duplex
or Cancel Job
Install envelope
feeder
Install tray [x]
Load manual feeder
with [Custom
String]
Description/action
This message is displayed when a duplex option has been hot unplugged.
The printer requires the reinstallation of the option to print a page which has
been formatted by the interpreter before the option was removed.
The following actions may be taken:
• Install the duplex option.
• Select one of the following:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
on page 2-127.
The MFP detects that the optional envelope feeder is missing between the
time the job processes, but before the job prints. Sometime during
processing, the optional envelope feeder is removed.
Install the optional envelope feeder. The message clears.
Touch Cancel Job if needed.
Touch Reset Active Bin to reset the active bin for a linked set of bins.
If the message cannot be cleared, go to
on page 2-129.
The MFP detects that optional Tray [x], where x is the number of the tray, is
missing while the job processes, but before the job prints. Sometime during
processing, the optional tray is removed.
Install the optional tray specified by x. The message clears.
Touch Cancel Job if needed.
Touch Reset Active Bin to reset the active bin for a linked set of bins.
If the message cannot be cleared, go to
page 2-147.
Occurs when the MFP receives a manual feed request that a specific print
media be loaded into the multipurpose feeder. The print media is previously
defined as a custom string which appears on the operator panel.
Touch Continue.
• If print media is in the multipurpose feeder, the job continues to print.
• If there is no print media in the multipurpose feeder, all requests for
additional pages are automatically overridden, and print media is
selected from an automatic source.
Touch Automatically select media to override manual requests for Manual
Paper and Manual Env for the rest of the print job. All requests for
additional pages are automatically overridden, and print media is selected
from an automatic source.
Touch Cancel Job to cancel the current job if needed.
Touch Reset Active Bin to change to another linked bin.
"Duplex option service check"
"Envelope feeder service check"
"Input tray(s) service check" on
Diagnostic information
7002-xxx
2-45