Lexmark X642e Service Manual page 328

7002-xxx
5.
Remove the operator panel left side cover. See
page 4-61.
6.
Disconnect the cable (D) from the LCD inverter card assembly.
7.
Remove the touchscreen bezel. See
8.
Press the two tabs (E) that limit range of motion, and rotate the LCD touchscreen up until it disconnects.
9.
Set the LCD touchscreen aside.
Warning:
4-68
Service Manual
"Touchscreen bezel removal" on page
Avoid touching or placing pressure on the touchscreen. Do not handle roughly or drop.
"Operator panel left cover assembly removal" on
D
4-66.