CCD belt tension spring removal
1.
Remove the scan cover (flatbed). See
2.
Remove the flatbed contact glass. See
3.
Remove the scanner right side cover. See
removal" on page
4.
Remove the scanner left side cover. See
5.
Push the CCD belt tension spring toward the motor to take tension from the belt.
6.
Unhook the belt from the motor shaft.
"Scan cover (flatbed) removal" on page
"Flatbed contact glass removal" on page
"Lift the scan cover (flatbed). Scanner right side cover
4-12.
"Scanner left side cover removal" on page
7002-xxx
4-11.
4-31.
4-10.
4-19
Repair information