Lexmark X642e Service Manual page 129

User attendance messages—paper jams and paper handling errors (2xx.xx)
Sub
Code Description
code
250 .06 Page did not reach input
sensor.
250 .07 Page was not properly
picked from
multipurpose feeder.
250 .08 Page was not properly
picked from
multipurpose feeder.
250 .09 Page was not properly
picked from
multipurpose feeder.
250 .10 Page was not properly
picked from
multipurpose feeder.
250 .11 Failed to feed from
multipurpose feeder.
Pages in the paper path
have been flushed to the
output bin.
260 .00 Paper jam near the
envelope feeder.
260 .01 Jam declared by a smart
device. Immediate stop.
260 .02 Jam declared by a smart
device. Homing allowed
stop.
260 .05 Envelope feeder pass
thru sensor never
became uncovered.
260 .06 Envelope feeder pass
thru sensor never
became covered.
260 .07 Failed to pick from the
envelope feeder.
260 .10 Page did not reach input
sensor from envelope
feeder.
260 .11 Page did not reach input
sensor from envelope
feeder.
260 .12 Page did not reach input
sensor from envelope
feeder.
Possible causes
Paper jam around the multipurpose tray.
Paper jam around the multipurpose
feeder.
Paper jam around the multipurpose
feeder.
Paper jam around the multipurpose
feeder.
Paper jam around the multipurpose
feeder.
Paper jam around the multipurpose
feeder.
Paper jam around the envelope feeder.
Paper jam around envelope feeder
Paper jam around envelope feeder
Paper jam around envelope feeder
7002-xxx
Action
• Check for jam in tray.
• Check pick assembly and
controller card.
• Check for jam in tray.
• Check pick assembly and
controller card.
• Check for jam in tray.
• Check pick assembly and
controller card.
• Check for jam in tray.
• Check the pick assembly
and controller card.
• Check for jam in tray.
• Check pick assembly and
controller card.
• Check for jam in tray.
• Check the pick assembly
and controller card.
• Remove feeder and clear
jam.
• Replace feeder.
• Remove feeder and clear
jam.
• Replace feeder.
• Remove feeder and clear
jam.
• Replace feeder.
• Remove feeder and clear
jam.
• Replace feeder.
Diagnostic information
2-91