7002-xxx
Factory Defaults
This setting enables a user to restore all the printer settings to the original factory settings. Selections are
Restore Base, Restore Network, or Restore LES. Restore LES enables you to remove all Lexmark Embedded
Solutions applications (LES).
Network does not appear unless you have a network printer. The following settings are not changed:
•
Display language
•
Settings in the NETWORK/PORTS MENU group.
To reset factory defaults:
1.
Touch
2.
Touch
Note: There is no confirmation, and selecting one of these settings immediately takes effect. The MFP
restarts and returns to Ready state.
Restoring Factory Defaults and then Resetting the Device are displayed.
Energy Conserve
This menu controls what values appear on the Power Saver menu. If Off is selected in Energy Conserve menu,
then Disabled appears in the Power Saver menu, and Power Saver can be turned off. If On is set in Energy
Conserve, the Power Saver feature cannot be disabled.
1.
Touch
2.
The panel displays the setting's name in the header and
row. Touch
3.
Touch Submit to save your change.
Touch Back to exit without changing the value.
3-28
Service Manual
to select Factory Defaults from the Configuration Menu.
to select either Restore Base, Restore Network, or Restore LES.
Factory Defaults
Restore Base
Restore Network
Restore LES
to select Energy Conserve from the Configuration Menu.
or
to change the setting. The selections are On and Off. The default is On.
Back
[setting's current value]
below the header