Lexmark X642e Service Manual page 278

7002-xxx
7.
Push the flatbed CCD all the way to the left.
8.
Unhook the main CCD guide shafts (E) from the holes in the right side. This allows you to remove the
flatbed CCD module from the shafts.
9.
Carefully lay the flatbed CCD module on the scan frame, being careful not to touch the card, lamp, or
mirrors.
10.
Disconnect the CCD belt from the retainer (F) in the flatbed CCD module assembly.
11.
Remove the CCD belt.
4-18
Service Manual
E
F