Lexmark X642e Service Manual page 285
Hide thumbs
Also See for X642e:
- Quick reference (5 pages) ,
- Install manual (4 pages) ,
- Technical reference manual (416 pages)
Table of Contents
Advertisement
8.
Unhook the main CCD guide shafts (A) from the holes in the right side. This allows you to remove the
flatbed CCD module from the shafts.
9.
Carefully lay the flatbed CCD module on the scan frame, being careful not to touch the card, lamp, or
mirrors.
10.
Disconnect the flatbed CCD ribbon cable (B) from the flatbed CCD module.
7002-xxx
4-25
Repair information
Advertisement
Table of Contents
