Lexmark X642e Service Manual page 109

User attendance messages—paper jams and paper handling errors (2xx.xx)
Sub
Code Description
code
202 .21 Page did not cleanly exit
fuser or redrive area.
Fuser page count
between 200,000 and
299,999.
202 .22 Exit sensor covered too
long. Fuser page count
between 200,000 and
299,999.
202 .23 Page is covering narrow
media sensor during
warm up. Fuser page
count between 200,000
and 299,999.
Possible causes
Page may be jammed in fuser exit or
redrive area.
Page may be jammed in fuser exit or
redrive area.
• If page is not visible from front or rear
of the printer, a partial piece of page
may be torn off in the fuser covering
the narrow media sensor.
• The narrow media sensor or flag may
be dislodged or damaged.
7002-xxx
Action
• Make sure the redrive door
is complete closed.
• Check the fuser for any
signs of wear or
contamination. If any are
found, replace the fuser
assembly. See "Fuser
assembly removal" on
page 4-79.
• Turn media over to reduce
+W curl.
• Check upper redrive
diverter and diverter spring
for any signs of damage, a
loose spring, or binding
parts. Repair the redrive as
necessary.
• Check any installed output
options(s) that may be
installed for correct
installation and alignment.
• The fuser exit sensor may
not be functioning properly.
Go to "Fuser exit sensor
service check" on
page 2-138.
• Make sure the redrive door
is complete closed.
• Check the fuser for any
signs of wear or
contamination. If any are
found, replace the fuser
assembly. See "Fuser
assembly removal" on
page 4-79.
• Turn media over to reduce
+W curl.
• Check upper redrive
diverter and diverter spring
for any signs of damage, a
loose spring, or binding
parts. Repair the redrive as
necessary.
• Check any installed output
options(s) that may be
installed for correct
installation and alignment.
• The fuser exit sensor may
not be functioning properly.
Go to "Fuser exit sensor
service check" on
page 2-138.
Check the fuser and area
around the fuser assembly for
any signs of debris or pieces of
paper or media.
Diagnostic information
2-71