Lexmark X642e Service Manual page 97

User attendance messages—paper jams and paper handling errors (2xx.xx)
Sub
Code Description
code
200 .16 Main drive motor error
possibly due to
mechanical load.
200 .32 Detected cover switch
bounce.
201 .00 Page did not reach exit
sensor. Fuser page
count between 0 and
99,999.
201 .01 Main motor identification
failed.
Main drive motor
identification failed.
Fuser page count
between 0 and 99,999.
201 .02 Page did not reach exit
sensor. Fuser page
count between 0 and
99,999.
201 .03 Video never started with
page two inches past
the input sensor. Fuser
page count between 0
and 99,999.
Possible causes
Main drive motor not working.
High mechanical load due to paper jam
or bind.
• Upper cover not fully closed.
• Cover switch not functioning
correctly.
• Page jammed on fuser input guide.
• Page did not enter or exit fuser nip
cleanly.
• Exit sensor not functioning correctly.
Main motor not working.
• Page jammed on fuser input guide.
• Page did not enter or exit fuser nip
cleanly.
• Exit sensor not functioning correctly.
7002-xxx
Action
• Make sure paper path is
clear
• Check motor to system card
connections.
• Replace transport motor.
Go to "Main drive service
check" on page 2-153.
Check cover switch for proper
function.
Go to "Cover closed switch/
cable service check—printer"
on page 2-125.
• Check fuser entry guide for
toner build up.
• Check fuser for wear or
contamination. If problem is
found, replace the fuser
assembly. See "Fuser
assembly removal" on
page 4-79.
• The fuser exit sensor may
not be functioning properly.
Go to "Fuser exit sensor
service check" on
page 2-138.
Check motor connections to
motor and system board. If no
problem is found, go to "Main
drive service check" on
page 2-153.
• Check fuser entry guide for
toner build up.
• Check the fuser for wear or
contamination. If a problem
is found, replace the fuser
assembly. See "Fuser
assembly removal" on
page 4-79.
• If no problem with wear or
contamination is found, go
to "Fuser exit sensor
service check" on
page 2-138
Diagnostic information
2-59