Lexmark X642e Service Manual page 93

User attendance messages (continued)
Sub
Code Primary message
code
62 .xx Disk full
Unformatted disk
63 .xx
64 .xx Unsupported disk
format
80 .xx Scheduled
maintenance
advised
81 .xx Engine Code CRC
Failure
Toner is low
88 .xx
Emul error, load
1565 1565
emulation option
Description/action
Model X646e only. The MFP detects that there is not enough memory or
space on the hard disk to store the data of the print job.
Touch Continue to clear the message and continue processing the current
print job. Any information not previously stored on the hard disk is deleted.
• Delete fonts, macros, and other data stored on the hard disk.
• Install a hard disk with a larger memory capacity.
Model X646e only. The hard disk is not formatted.
Format the hard disk prior to performing operations that require the hard
disk.
If the message remains, the hard disk may be defective and require
replacing.
Model X646e. The hard disk format is not supported.
Format the hard disk prior to performing operations that require the hard
disk.
If the message remains, the hard disk may be defective and require
replacing.
Service is required to maintain printer performance.
Replace the maintenance items and if necessary, reset the printer
maintenance counter. For more information, go to
maintenance" on page 6-1.
This error displays when the microcode to be programmed in the engine
flash code module has failed a CRC check. POR the MFP to clear the
message. The microcode data is discarded and must be re-transmitted from
the host computer.
The toner cartridge is running low on toner.
Replace the toner cartridge if the toner low alarm sounds.
Touch Continue to clear the message if the toner low alarm does not
sound.
The download emulator contained in the firmware card does not function
with the MFP firmware.
Note: The MFP automatically clears the message in 30 seconds and then
disables the download emulator on the firmware card.
For help downloading the correct download emulator version, contact the
place where you bought your printer.
7002-xxx
"Scheduled
2-55
Diagnostic information