Flatbed paper length sensor assembly removal
Illustrations represent models X644e/X646e. Unless there is an indication, the procedure is the same. Differences
are shown side by side.
1.
Remove the scan cover (flatbed). See
2.
Remove the flatbed contact glass. See
3.
Remove the scanner right side cover. See
removal" on page
4.
Remove the scanner left side cover. See
5.
Remove the three screws (A) that attach the hinge support bracket to the rear scan bracket.
"Scan cover (flatbed) removal" on page
"Flatbed contact glass removal" on page
"Lift the scan cover (flatbed). Scanner right side cover
4-12.
"Scanner left side cover removal" on page
A
7002-xxx
4-11.
4-31.
4-10.
4-35
Repair information