Adf Hinge Removal; Flatbed Assembly Removal; Control Panel Ribbon Cable Removal - Lexmark MX310 Service Manual

ADF hinge removal

Note: The removal shown is for the left ADF hinge. The right ADF hinge is removed in a similar manner.
1
Remove the ADF assembly. See
2
Remove the four screws (A) securing the ADF hinge to the ADF assembly.

Flatbed assembly removal

1
Remove the ADF assembly. See
2
Remove the scanner assembly from the MFP. See
3
Remove the control panel assembly. See
4
Remove the ADF cable. See
5
Remove the USB wireless cable. See
6
Remove the control panel USB cable. See
7
Remove the speaker cable. See
8
Remove the wireless control panel cover.
Installation note: After the new flatbed is installed, perform scanner manual registration, see
manual registration" on page 244

Control panel ribbon cable removal

1
Remove the left cover. See
2
Remove the scanner front cover. See
"ADF unit removal" on page
"ADF unit removal" on page
"Scanner assembly removal" on page
"Control panel assembly removal" on page
"ADF cable removal" on page
"USB wireless cable removal" on page
"USB cable removal" on page
"Speaker cable removal" on page
and scanner calibration, see
"Left cover removal" on page
"Scanner front cover removal" on page
Parts removal
398
388.
A
388.
395.
395.
399.
"Scanner calibration" on page
279.
7015
390.
315.
396.
"Scanner
221.
386.