Accessing Service Menus; Configuration Menu; Available Options - Lexmark Pro910 Series Service Manual

Use
7 Setup icon
8 Eco-Mode icon
9 Network indicator

Accessing service menus

Service menus can be accessed during POR to identify problems with the printer. To access them, perform the
following:
1.
POR the printer.
2.
The Lexmark splash screen and progress bar appears. The icons beside the display light up.
3.
Touch and hold
The printer can be set to always POR into Manufacturing Mode. See

Configuration Menu

The Configuration Menu group consists of menus, settings and operations that are used to configure a printer
for operation.
To access the Configuration Menu, from the home screen, touch

Available options

Format Fax Storage
ADF Edge Erase
FB Edge Erase
USB Speed
Edge to Edge Printing
To
Access the setup menu and change printer settings.
Activate Eco-Mode to select the following options:
• Print on both sides of the paper (duplex).
• Change to Sleep mode after the printer is left idle for 10 minutes.
• Set screen brightness to low.
Check the network connection status of your printer and access the network
settings.
until appears.
See "Format Fax Storage" on page
See "ADF Edge Erase" on page
See "FB Edge Erase" on page
See "USB Speed" on page
See "Edge to Edge Printing" on page
Lexmark Pro910 Series
"Manufacturing Mode" on page
> Configuration Menu.
3-4.
3-4.
3-4.
3-4.
3-4.
Diagnostic aids
Previous
Next
Go Back
3-9.
3-3