Table of Contents
Advertisement
4036-307/308
Configuration menu (CONFIG MENU)
Entering Configuration Menu
1.
Turn off the printer.
2.
Press and hold 2 and 6 buttons simultaneously.
3.
Turn on the printer.
4.
Release the buttons after 10 seconds.
Available menus
Note: Some menus are not available, depending on the configuration of the printer. For other menu items, see
the printer service manual.
Panel
Format Fax Storage
ADF Edge Erase
FB Edge Erase
Automatic Scanner Registration
EVENT LOG (print log only)
Jobs On Disk
Disk Encryption
Wipe Disk
Key Repeat Initial Delay
Key Repeat Rate
Wiper Message
Exit
Config Menu
Panel Menus
To change the Panel Menus setting:
1.
Touch
2.
The panel displays the setting's name in the header and
row. Touch
3.
Touch Submit to save your change.
Touch Back to exit without changing the value.
3-6
Service Manual
Touch Exit Config Menu to exit the Configuration Menu and Resetting the Printer
displays. The printer performs a POR, and the printer returns to normal mode.
to select Panel Menus from the Configuration Menu.
or
to change the setting. The selections are Disable and Enable. The default is Enable.
See
"Panel Menus" on page
See
"ADF Edge Erase" on page
See
"FB Edge Erase" on page
See
"Automatic Scanner Registration" on page
See
"EVENT LOG" on page
See
"Jobs On Disk" on page
See
"Disk Encryption" on page
See
"Wipe Disk" on page
See
"Key Repeat Initial Delay" on page
See
"Key Repeat Rate" on page
See
"Wiper Message" on page
[setting's current value]
3-6.
3-7.
3-7.
3-8.
3-3.
3-9.
3-9.
3-10.
3-11.
3-11.
3-11.
below the header
Advertisement
Table of Contents
