Special Media - Dell C7765dn User Manual

12 Paper and Other Media
Paper Name Size
Xerox Colotech+ A4, A3,
Natural White A3+,
SRA3
A4, A3,
A3+,
SRA3
A4, A3,
A3+,
SRA3
*1 : Select the paper type setting for the paper loaded on a tray. For more information, refer to "Changing the Paper Settings"
(P.244).
*2 : Most ideal image quality with the paper can be obtained by setting the image quality for each type of paper. For more
information on the settings, refer to "Image Quality" (P.324).

Special Media

You can use the following special media such as postcards and envelopes:
Paper Name Size
Xerox 8.5 x 11"
Transparency -
Removable Stripe
Envelopes 4.1 x 9.5"
3.9 x 7.5"
Xerox Colour Laser
Labels
Xerox High Speed
Laser Removable
Labels
Xerox High Speed
Laser Labels
230
Basis Weight
100 gsm
160 gsm
200 gsm
Basis Weight
-
75 - 90 gsm
75 - 90 gsm
A4 -
A4 -
A4 -
Paper Image
*1
Type Quality
Bond Plain A
Heavyweight HW 1A
Extra HW 2A
Heavyweight
Paper Image
*1
Type Quality
Transparency Transparency
No. 10 Envelope
Envelope
(4.1 x 9.5")
Monarch Envelope
Envelope
(3.9 x 7.5")
Label HW 2A
Labels HW 2A
Labels HW 2A
Notes / Countermeasure
*2
• Tray 1 does not support
A3+ and SRA3.
• Tray 1 does not support
A3+ and SRA3.
• Tray 1 does not support
A3+ and SRA3.
• When you use Tray 5,
automatic duplexing is not
available.
Notes / Countermeasure
*2
• Load the paper with the
paper stripe at the trail
edge.
• It is not recommended to
output more than 20
transparencies at a time.
• Duplexing is not available.
• Place plain paper
underneath the
transparency sheet if
misfeeds occur.
• Load the paper into Tray 5.
• Duplexing is not available.
• Load the paper into Tray 5.
• Duplexing is not available.
• Load the paper into Tray 1
or Tray 5.
• Duplexing is not available.
• Load the paper into Tray 1
or Tray 5.
• Duplexing is not available.
• Load the paper into Tray 1
or Tray 5.
• Duplexing is not available.