User Account Billing Information - Dell C7765dn User Manual

14 Machine Status
Note

User Account Billing Information

You can check the number of pages printed by user.
When the Accounting mode is enabled, you can check the billing meters for the currently
authenticated user ID.
Note
For more information on the Accounting mode, refer to "Accounting" (P.441).
1
Press the <Log In/Out> button.
To check the billing meter of a currently authenticated user ID
1) Enter the user ID with the numeric keypad
or the keyboard displayed on the screen, and
select [Enter].
When a password is required, select [Next]
and enter the user's passcode, and select
[Enter].
2) Press the <Machine Status> button.
To check the system administrator meter
1) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
2) Press the <Machine Status> button.
2
Select the [Billing Information] tab.
3
Select [User Account Billing Information].
292
• When print data resulting from color conversion using an ICC profile, for example, on the application is
printed at Auto (Color/B/W), even documents that appear in black-and-white on the monitor are
printed in color. In this case, Color Impressions is used for counting the number of prints.
• *1 is applied on machines equipped with the Fax features. Only B/W and not color is supported for
Faxes.
• For *2, large-size full color is counted as a print at either of number of full color copies or number of full
color prints in Color Impressions if a copy or print is made on paper of 279 mm x 400 mm or larger (279
mm or more in the primary scanning direction and 400 mm or more in the secondary scanning
direction) when the user has selected color (4-color or 3-color) for copying or printing or a color
document has been recognized during document scanning on the scanner.
• [User Account Billing Information] is displayed when the [Accounting Type] is set to [Local
Accounting].
• The default user ID is "admin".
• The default passcode is "1111".