Dell C7765dn User Manual page 663

Status Code
033-725
[Cause]
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
033-726
[Cause]
[Remedy] No measure is required.
033-727
[Cause]
[Remedy] No measure is required.
033-728
[Cause]
[Remedy] No measure is required. The machine will automatically start the auto print job after
033-731
[Cause]
[Remedy] The auto print processing of the received fax document was interrupted by a manual
033-733
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
033-734
[Cause]
[Remedy] No measure is required.
033-735
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
033-736
[Cause]
[Remedy] No measure is required.
033-737
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
033-738
[Cause]
[Remedy] No measure is required.
033-740
[Cause]
[Remedy] No measure is required.
033-741
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
033-742
[Cause]
[Remedy] If this error was caused when using Manual Send, connect the line after storing the
The hard disk is full.
The received document was printed with 1 sided printing, because 2 sided printing is not
available for mixed sized documents.
The received page was printed without being rotated, because its data volume was too
large to change the orientation automatically.
The auto print formatting of the received fax document was interrupted by a manual
print operation.
manual printing completes.
The printing of the received fax document was interrupted.
print operation. No measure is required.
An error occurred during fax transmission.
on the machine power. If the error still is not resolved, contact Customer Support at
dell.com/contactdell.
Because a report job was instructed while preparing to print a received fax, the printing
of the received fax is temporarily suspended.
An error occurred during fax transmission.
on the machine power. If the error still is not resolved, contact Customer Support at
dell.com/contactdell.
The forwarding job was interrupted because the data volume exceeded the upper limit.
An error occurred during fax transmission.
at dell.com/contactdell.
Received abnormal JBIG data.
The printing of the received fax document was interrupted.
An error occurred during fax transmission.
at dell.com/contactdell.
An error occurred during fax transmission. This error may occur if the remaining
capacity of the machine's memory is 10% or less and Manual Send is used.
document, and then send. If the error still is not resolved, delete unnecessary data from
the hard disk to free up disk space, and execute the operation again.
If the error persists, contact Customer Support at dell.com/contactdell.
Cause and Remedy
Status Code
663